{"id":4567,"date":"2025-12-27T11:37:20","date_gmt":"2025-12-27T17:37:20","guid":{"rendered":"https:\/\/kimeca.com.mx\/?page_id=4567"},"modified":"2025-12-27T11:37:26","modified_gmt":"2025-12-27T17:37:26","slug":"abaqus-cae","status":"publish","type":"page","link":"https:\/\/kimeca.com.mx\/index.php\/products\/dassault-systemes\/simulia\/abaqus-cae\/","title":{"rendered":"Abaqus\/CAE"},"content":{"rendered":"

[et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”4.27.0″ background_color=”RGBA(255,255,255,0)” background_enable_image=”off” collapsed=”off” global_colors_info=”{}”][et_pb_row admin_label=”row” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_slider _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_slide heading=”Abaqus\/CAE” image=”https:\/\/kimeca.com.mx\/wp-content\/uploads\/2025\/12\/abq-cae.png” _builder_version=”4.27.0″ _module_preset=”default” background_color=”RGBA(255,255,255,0)” background_enable_color=”on” background_layout=”light” text_shadow_style=”preset5″ global_colors_info=”{}” sticky_transition=”on”]<\/p>\n

(Complete Abaqus Environment) is an integrated software platform for Finite Element Analysis (FEA), providing a single, user-friendly interface for model creation, analysis setup, job management, and results visualization (pre-processing and post-processing) for Abaqus simulations<\/p>\n

[\/et_pb_slide][\/et_pb_slider][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section fb_built=”1″ admin_label=”Geometry” _builder_version=”4.27.0″ _module_preset=”default” background_color=”#f7f7f7″ global_colors_info=”{}”][et_pb_row _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

<\/span>Geometry<\/span><\/h2>\n

[\/et_pb_text][et_pb_accordion _builder_version=”4.27.0″ _module_preset=”default” background_enable_color=”off” global_colors_info=”{}”][et_pb_accordion_item title=”Geometry Creation Tools” open=”on” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n\n\n\n
\n
    \n
  • Solid features\n
      \n
    • Extrude<\/li>\n
    • Loft<\/li>\n
    • Revolve<\/li>\n
    • Sweep<\/li>\n
    • Draft, twist, and pitch<\/li>\n
    • Fillet\/chamfer<\/li>\n<\/ul>\n<\/li>\n
    • Cut features\n
        \n
      • Extrude<\/li>\n
      • Loft<\/li>\n
      • Revolve<\/li>\n
      • Sweep<\/li>\n
      • Circular hole<\/li>\n<\/ul>\n<\/li>\n
      • Shell features\n
          \n
        • Planar surface<\/li>\n
        • Extrude<\/li>\n
        • Loft<\/li>\n
        • Revolve<\/li>\n
        • Sweep<\/li>\n
        • Fillet\/chamfer\u00a0<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<\/td>\n
\n
    \n
  • Wire features\n
      \n
    • Planar<\/li>\n
    • Poly line<\/li>\n
    • Spline<\/li>\n
    • Fillet<\/li>\n
    • From edge<\/li>\n<\/ul>\n<\/li>\n
    • Mirror feature<\/li>\n
    • Datum geometry<\/li>\n
    • Partitioning tools\n
        \n
      • Edge<\/li>\n
      • Face<\/li>\n
      • Cell<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

        [\/et_pb_accordion_item][et_pb_accordion_item title=”2D Sketcher” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

          \n
        • Point<\/li>\n
        • Line<\/li>\n
        • Circle<\/li>\n
        • Rectangle<\/li>\n
        • Arc<\/li>\n
        • \u00a0Fillet<\/li>\n
        • Spline<\/li>\n
        • Ellipse<\/li>\n<\/ul>\n

          [\/et_pb_accordion_item][et_pb_accordion_item title=”Sketch Tools and Options” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

            \n
          • Constraints<\/li>\n
          • Parameters<\/li>\n
          • Translate\/rotate\/mirror\/scale<\/li>\n
          • Trim\/extend\/break\/merge<\/li>\n
          • Project edges<\/li>\n
          • Offset entities<\/li>\n
          • Linear\/radial pattern<\/li>\n
          • Dimensioning<\/li>\n
          • Construction geometry<\/li>\n
          • Sketch origin placement<\/li>\n
          • Sketch cleanup<\/li>\n
          • Sketch import\/export<\/li>\n<\/ul>\n

            [\/et_pb_accordion_item][et_pb_accordion_item title=”Geometry Import\/Export” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

              \n
            • CAD Associative Interfaces (add-on modules)\n
                \n
              • CATIA V6<\/li>\n
              • CATIA V5<\/li>\n
              • SolidWorks<\/li>\n
              • Pro\/ENGINEER\n
                  \n
                • CAD feature parameter update<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<\/li>\n
                • CAD geometry translators (add-on modules)\n
                    \n
                  • CATIA V4<\/li>\n
                  • I-deas NX<\/li>\n
                  • Parasolid<\/li>\n<\/ul>\n<\/li>\n
                  • Assembly import<\/li>\n
                  • Neutral format import\n
                      \n
                    • SAT, IGES, STEP, or VDA<\/li>\n
                    • Import of parts from Abaqus files\n
                        \n
                      • Input (.inp)<\/li>\n
                      • Output database (.odb)<\/li>\n
                      • Linear dynamics (substructure) data (.sim)<\/li>\n<\/ul>\n<\/li>\n
                      • Geometry export\n
                          \n
                        • SAT, IGES, STEP, or VDA<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n

                          [\/et_pb_accordion_item][et_pb_accordion_item title=”Model Import\/Export” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                            \n
                          • Model database (.cae) files<\/li>\n
                          • Models from Abaqus input (.inp) files<\/li>\n
                          • Nastran bulk data files<\/li>\n
                          • Ansys input file import<\/li>\n
                          • Wavefront (.obj) export<\/li>\n<\/ul>\n

                            [\/et_pb_accordion_item][et_pb_accordion_item title=”Geometry Edit Tools” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                              \n
                            • Automated repair during import<\/li>\n
                            • Stitch edges<\/li>\n
                            • Repair small\/invalid edges<\/li>\n
                            • Merge edges<\/li>\n
                            • Remove redundant entities<\/li>\n
                            • Remove wire edges<\/li>\n
                            • Remove\/cover\/replace faces<\/li>\n
                            • Repair small faces\/slivers\/face normals<\/li>\n
                            • Offset faces<\/li>\n
                            • Extend faces<\/li>\n
                            • Blend faces<\/li>\n
                            • Solid from shell<\/li>\n
                            • Convert to analytical<\/li>\n
                            • Convert to precise<\/li>\n
                            • Faces from element faces<\/li>\n<\/ul>\n

                              [\/et_pb_accordion_item][et_pb_accordion_item title=”Midsurfacing” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                \n
                              • Offset\/extend\/blend faces (geometry edit tools)<\/li>\n
                              • Assign thickness and offset<\/li>\n<\/ul>\n

                                [\/et_pb_accordion_item][\/et_pb_accordion][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section fb_built=”1″ admin_label=”Assembly” _builder_version=”4.27.0″ _module_preset=”default” background_color=”RGBA(255,255,255,0)” global_colors_info=”{}”][et_pb_row _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

                                <\/span>Assembly<\/span><\/h2>\n

                                [\/et_pb_text][et_pb_accordion _builder_version=”4.27.0″ _module_preset=”default” background_enable_color=”off” global_colors_info=”{}”][et_pb_accordion_item title=”Instance Tools” open=”on” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

                                  \n
                                • Create\/suppress\/resume\/delete<\/li>\n
                                • Linear\/radial pattern<\/li>\n
                                • Translate\/rotate<\/li>\n
                                • Replace<\/li>\n<\/ul>\n

                                  [\/et_pb_accordion_item][et_pb_accordion_item title=”Merge\/Cut Tools” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                    \n
                                  • Geometric parts<\/li>\n
                                  • Merge orphan mesh<\/li>\n
                                  • Merge geometric and orphan mesh parts<\/li>\n<\/ul>\n

                                    [\/et_pb_accordion_item][et_pb_accordion_item title=”Sets and Surfaces” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                      \n
                                    • Geometric sets containing vertices, edges, faces, skins, or cells<\/li>\n
                                    • Orphan mesh sets containing nodes or elements<\/li>\n
                                    • Native mesh sets and surfaces<\/li>\n
                                    • Surface regions<\/li>\n
                                    • Merge sets\/surfaces\n
                                        \n
                                      • Union<\/li>\n
                                      • Intersection<\/li>\n
                                      • Difference<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n

                                        [\/et_pb_accordion_item][et_pb_accordion_item title=”Model Display” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                          \n
                                        • Display groups<\/li>\n
                                        • Selection tools<\/li>\n
                                        • Pick filters<\/li>\n
                                        • Translucency control<\/li>\n
                                        • View cuts<\/li>\n
                                        • View center setting<\/li>\n<\/ul>\n

                                          [\/et_pb_accordion_item][et_pb_accordion_item title=”Color Coding” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                            \n
                                          • Display model geometry and mesh elements in configurable colors<\/li>\n
                                          • Color by attribute<\/li>\n<\/ul>\n

                                            [\/et_pb_accordion_item][\/et_pb_accordion][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section fb_built=”1″ admin_label=”Properties” _builder_version=”4.27.0″ _module_preset=”default” background_color=”#f7f7f7″ global_colors_info=”{}”][et_pb_row _builder_version=”4.27.0″ _module_preset=”default” background_color=”RGBA(255,255,255,0)” custom_margin=”0px||0px||false|false” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

                                            <\/span>Properties<\/span><\/h2>\n

                                            [\/et_pb_text][et_pb_accordion _builder_version=”4.27.0″ _module_preset=”default” background_enable_color=”off” global_colors_info=”{}”][et_pb_accordion_item title=”Material Models” open=”on” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

                                              \n
                                            • General<\/li>\n
                                            • Elasticity<\/li>\n
                                            • Electrical properties<\/li>\n
                                            • Mass diffusion<\/li>\n
                                            • Magnetic properties<\/li>\n
                                            • Plasticity<\/li>\n
                                            • Electromagnetic properties<\/li>\n
                                            • Pore fluid properties<\/li>\n
                                            • Thermal properties<\/li>\n
                                            • Gasket<\/li>\n
                                            • Acoustic medium<\/li>\n
                                            • Damage initiation criteria and evolution<\/li>\n
                                            • Brittle cracking<\/li>\n
                                            • Equation of state (EOS) materials<\/li>\n
                                            • User materials<\/li>\n
                                            • Hyperelastic\/viscoelastic material evaluation<\/li>\n
                                            • Anisotropic hyperelasticity<\/li>\n<\/ul>\n

                                              [\/et_pb_accordion_item][et_pb_accordion_item title=”Materials Management and Calibration” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                \n
                                              • User libraries<\/li>\n
                                              • Import\/process test data and define calibration behaviors<\/li>\n<\/ul>\n

                                                [\/et_pb_accordion_item][et_pb_accordion_item title=”Sections” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                  \n
                                                • Solid\n
                                                    \n
                                                  • Homogeneous<\/li>\n
                                                  • Composite<\/li>\n
                                                  • Eulerian<\/li>\n
                                                  • Generalized plane strain<\/li>\n<\/ul>\n<\/li>\n
                                                  • Shell\n
                                                      \n
                                                    • Homogeneous<\/li>\n
                                                    • Composite<\/li>\n
                                                    • Membrane<\/li>\n
                                                    • Surface (rebar layers)<\/li>\n
                                                    • Shell offset<\/li>\n<\/ul>\n<\/li>\n
                                                    • Beam\n
                                                        \n
                                                      • Beam<\/li>\n
                                                      • Truss<\/li>\n
                                                      • Other<\/li>\n
                                                      • Gasket<\/li>\n
                                                      • Cohesive<\/li>\n<\/ul>\n<\/li>\n
                                                      • Gasket<\/li>\n
                                                      • Beam section profiles\n
                                                          \n
                                                        • Profile library<\/li>\n
                                                        • Arbitrary<\/li>\n
                                                        • Generalized<\/li>\n
                                                        • Tapered<\/li>\n<\/ul>\n<\/li>\n
                                                        • Fluid section<\/li>\n
                                                        • Beam profile and shell thickness rendering<\/li>\n
                                                        • Electromagnetic, solid section<\/li>\n<\/ul>\n

                                                          [\/et_pb_accordion_item][et_pb_accordion_item title=”Composites” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                            \n
                                                          • Ply layup definition and management<\/li>\n
                                                          • Layer orientation and thickness distributions<\/li>\n
                                                          • Ply stack plots<\/li>\n
                                                          • Classic laminate theory<\/li>\n
                                                          • Nonlinear progressive damage and failure<\/li>\n
                                                          • Ply-based output request<\/li>\n<\/ul>\n

                                                            [\/et_pb_accordion_item][et_pb_accordion_item title=”Orientations” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                              \n
                                                            • Beam section<\/li>\n
                                                            • Material<\/li>\n
                                                            • Rebar<\/li>\n
                                                            • Shell normal<\/li>\n
                                                            • Surface- and direction-based<\/li>\n<\/ul>\n

                                                              [\/et_pb_accordion_item][et_pb_accordion_item title=”Special Engineering Features” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                \n
                                                              • Fasteners\n
                                                                  \n
                                                                • Point-based<\/li>\n
                                                                • Discrete<\/li>\n
                                                                • Assembled<\/li>\n
                                                                • Points import and definition<\/li>\n
                                                                • Projection, offset, and patterning tools<\/li>\n<\/ul>\n<\/li>\n
                                                                • Skins and stringers<\/li>\n
                                                                • Inertia\n
                                                                    \n
                                                                  • Point mass\/inertia<\/li>\n
                                                                  • Nonstructural mass<\/li>\n
                                                                  • Heat capacitance<\/li>\n<\/ul>\n<\/li>\n
                                                                  • Springs\/dashpots<\/li>\n<\/ul>\n

                                                                    [\/et_pb_accordion_item][et_pb_accordion_item title=”Queries” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                      \n
                                                                    • Point\/node\/distance\/angle<\/li>\n
                                                                    • Geometry diagnostics<\/li>\n
                                                                    • Section assignment<\/li>\n<\/ul>\n

                                                                      [\/et_pb_accordion_item][\/et_pb_accordion][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section fb_built=”1″ admin_label=”Analysis Features” _builder_version=”4.27.0″ _module_preset=”default” background_color=”RGBA(255,255,255,0)” global_colors_info=”{}”][et_pb_row _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

                                                                      <\/span>Analysis Features<\/span><\/h2>\n

                                                                      [\/et_pb_text][et_pb_accordion _builder_version=”4.27.0″ _module_preset=”default” background_enable_color=”off” global_colors_info=”{}”][et_pb_accordion_item title=”General, Linear, and Nonlinear Analyses” open=”on” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

                                                                        \n
                                                                      • Static stress\/displacement analysis<\/li>\n
                                                                      • Viscoelastic\/viscoplastic response<\/li>\n
                                                                      • Dynamic stress\/displacement analysis<\/li>\n
                                                                      • Heat transfer analysis (transient and steady-state)<\/li>\n
                                                                      • Mass diffusion analysis (transient and steady-state)<\/li>\n
                                                                      • Direct cyclic\n
                                                                          \n
                                                                        • Low-cycle fatigue<\/li>\n<\/ul>\n<\/li>\n
                                                                        • Acoustic analysis<\/li>\n
                                                                        • Coupled problems\n
                                                                            \n
                                                                          • Thermo-mechanical<\/li>\n
                                                                          • Thermo-electrical<\/li>\n
                                                                          • Piezoelectric<\/li>\n
                                                                          • Coupled thermal-electrical-structural<\/li>\n
                                                                          • Pore fluid flow-mechanical<\/li>\n
                                                                          • Thermo-mechanical mass diffusion<\/li>\n
                                                                          • Shock and acoustic-structural<\/li>\n<\/ul>\n<\/li>\n
                                                                          • Cosimulation\n
                                                                              \n
                                                                            • Abaqus\/Standard to Abaqus\/Explicit cosimulation Abaqus\/CFD to Abaqus\/Standard or Abaqus\/Explicit<\/li>\n
                                                                            • Fluid structure interaction (FSI)<\/li>\n
                                                                            • Conjugate heat transfer (CHT)<\/li>\n<\/ul>\n<\/li>\n
                                                                            • Flow analysis (incompressible)\n
                                                                                \n
                                                                              • Laminar and turbulent<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n

                                                                                [\/et_pb_accordion_item][et_pb_accordion_item title=”Linear Perturbation Analyses” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                                  \n
                                                                                • Static stress\/displacement analysis\n
                                                                                    \n
                                                                                  • Linear static stress\/displacement analysis<\/li>\n
                                                                                  • Eigenvalue buckling estimates<\/li>\n<\/ul>\n<\/li>\n
                                                                                  • Dynamic stress\/displacement analysis\n
                                                                                      \n
                                                                                    • Natural frequency extraction<\/li>\n
                                                                                    • Complex eigenvalue extraction<\/li>\n
                                                                                    • Transient response via modal superposition<\/li>\n
                                                                                    • Steady-state response to harmonic loading<\/li>\n
                                                                                    • Response spectrum analysis<\/li>\n
                                                                                    • Random response analysis<\/li>\n<\/ul>\n<\/li>\n
                                                                                    • Substructure Generation<\/li>\n
                                                                                    • Electromagnetic, time harmonic<\/li>\n<\/ul>\n

                                                                                      [\/et_pb_accordion_item][et_pb_accordion_item title=”Multi-Step Setup” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                                        \n
                                                                                      • Step suppression<\/li>\n<\/ul>\n

                                                                                        [\/et_pb_accordion_item][et_pb_accordion_item title=”Analysis Controls” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                                          \n
                                                                                        • General solution controls<\/li>\n
                                                                                        • Solver controls<\/li>\n
                                                                                        • Adaptive mesh domain<\/li>\n
                                                                                        • Adaptive mesh controls<\/li>\n<\/ul>\n

                                                                                          [\/et_pb_accordion_item][et_pb_accordion_item title=”Output Requests” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                                            \n
                                                                                          • Field output<\/li>\n
                                                                                          • History output<\/li>\n
                                                                                          • Integrated output sections<\/li>\n
                                                                                          • Contact status output<\/li>\n
                                                                                          • Restart, diagnostic, and monitor output<\/li>\n
                                                                                          • Sensors<\/li>\n<\/ul>\n

                                                                                            [\/et_pb_accordion_item][\/et_pb_accordion][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section fb_built=”1″ admin_label=”Constraints and Interactions” _builder_version=”4.27.0″ _module_preset=”default” background_color=”#f7f7f7″ global_colors_info=”{}”][et_pb_row _builder_version=”4.27.0″ _module_preset=”default” background_color=”RGBA(255,255,255,0)” custom_margin=”0px||0px||false|false” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

                                                                                            <\/span>Constraints and Interactions<\/span><\/h2>\n

                                                                                            [\/et_pb_text][et_pb_accordion _builder_version=”4.27.0″ _module_preset=”default” background_enable_color=”off” global_colors_info=”{}”][et_pb_accordion_item title=”Contact” open=”on” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

                                                                                              \n
                                                                                            • Automatic contact detection and setup<\/li>\n
                                                                                            • General contact (Abaqus\/Standard and Abaqus\/Explicit)<\/li>\n
                                                                                            • Surface-to-surface contact<\/li>\n
                                                                                            • Self-contact<\/li>\n
                                                                                            • Contact deactivation\/reactivation<\/li>\n<\/ul>\n

                                                                                              [\/et_pb_accordion_item][et_pb_accordion_item title=”Contact Properties” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                                                \n
                                                                                              • Mechanical\n
                                                                                                  \n
                                                                                                • Normal<\/li>\n
                                                                                                • Tangent<\/li>\n
                                                                                                • Damping<\/li>\n
                                                                                                • Clearance-dependent<\/li>\n
                                                                                                • Surface-based cohesive contact and damage<\/li>\n<\/ul>\n<\/li>\n
                                                                                                • Thermal\n
                                                                                                    \n
                                                                                                  • Conductance<\/li>\n
                                                                                                  • Heat generation<\/li>\n
                                                                                                  • Boundary radiation<\/li>\n<\/ul>\n<\/li>\n
                                                                                                  • Film coefficient<\/li>\n<\/ul>\n

                                                                                                    [\/et_pb_accordion_item][et_pb_accordion_item title=”Interactions” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                                                      \n
                                                                                                    • Cyclic symmetry<\/li>\n
                                                                                                    • Cavity\/surface radiation<\/li>\n
                                                                                                    • Surface\/concentrated film condition<\/li>\n
                                                                                                    • Elastic foundations<\/li>\n
                                                                                                    • Acoustic impedance<\/li>\n
                                                                                                    • Actuator\/sensor<\/li>\n
                                                                                                    • XFEM crack growth<\/li>\n
                                                                                                    • Model change<\/li>\n
                                                                                                    • Pressure penetration<\/li>\n
                                                                                                    • Abaqus\/Standard-Abaqus\/Explicit co-simulation boundary<\/li>\n
                                                                                                    • Fluid-Structure co-simulation boundary<\/li>\n
                                                                                                    • Fluid cavity<\/li>\n<\/ul>\n

                                                                                                      [\/et_pb_accordion_item][et_pb_accordion_item title=”Constraints” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                                                        \n
                                                                                                      • Tied surfaces<\/li>\n
                                                                                                      • Equations<\/li>\n
                                                                                                      • Display body<\/li>\n
                                                                                                      • Rigid and isothermal bodies<\/li>\n
                                                                                                      • Coupling<\/li>\n
                                                                                                      • Multi-point constraints<\/li>\n
                                                                                                      • Shell-to-solid coupling<\/li>\n
                                                                                                      • Embedded regions<\/li>\n<\/ul>\n

                                                                                                        [\/et_pb_accordion_item][et_pb_accordion_item title=”Connectors” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                                                          \n
                                                                                                        • Basic\n
                                                                                                            \n
                                                                                                          • Translational<\/li>\n
                                                                                                          • Rotational<\/li>\n<\/ul>\n<\/li>\n
                                                                                                          • Assembled\/complex<\/li>\n
                                                                                                          • Connector and coincident builder<\/li>\n<\/ul>\n

                                                                                                            [\/et_pb_accordion_item][et_pb_accordion_item title=”Boundary Conditions” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                                                              \n
                                                                                                            • Nodal<\/li>\n
                                                                                                            • Velocity<\/li>\n
                                                                                                            • Acceleration<\/li>\n
                                                                                                            • Velocity\/angular velocity<\/li>\n
                                                                                                            • Submodel<\/li>\n
                                                                                                            • Pore pressure<\/li>\n
                                                                                                            • Electric potential<\/li>\n
                                                                                                            • Temperatures<\/li>\n
                                                                                                            • Fluid inlet\/outlet<\/li>\n
                                                                                                            • Fluid wall condition<\/li>\n
                                                                                                            • Spatially varying boundary conditions<\/li>\n
                                                                                                            • Eulerian (inflow\/outflow\/motion)<\/li>\n
                                                                                                            • Magnetic<\/li>\n
                                                                                                            • Electromagnetic loads<\/li>\n<\/ul>\n

                                                                                                              [\/et_pb_accordion_item][et_pb_accordion_item title=”Predefined fields” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                                                                \n
                                                                                                              • Velocity\/Temperature\/Hardening<\/li>\n
                                                                                                              • Initial state (from previous analysis)<\/li>\n
                                                                                                              • Material assignment<\/li>\n
                                                                                                              • Fluid density\/thermal energy\/turbulence\/velocity<\/li>\n
                                                                                                              • Initial stress<\/li>\n
                                                                                                              • Geostatic stress\/ void ratio\/saturation\/pore pressure<\/li>\n<\/ul>\n

                                                                                                                [\/et_pb_accordion_item][et_pb_accordion_item title=”Loads” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                                                                  \n
                                                                                                                • Mechanical<\/li>\n
                                                                                                                • Bolt load<\/li>\n
                                                                                                                • Thermal<\/li>\n
                                                                                                                • Acoustic<\/li>\n
                                                                                                                • Fluid<\/li>\n
                                                                                                                • Electrical<\/li>\n
                                                                                                                • Mass diffusion<\/li>\n
                                                                                                                • Fields<\/li>\n
                                                                                                                • Multiple load cases<\/li>\n
                                                                                                                • Spatially varying loads<\/li>\n
                                                                                                                • Electromagnetic properties<\/li>\n<\/ul>\n

                                                                                                                  [\/et_pb_accordion_item][et_pb_accordion_item title=”Analytical and Discrete Fields” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                                                                    \n
                                                                                                                  • Analytical fields for prescribed conditions<\/li>\n
                                                                                                                  • Mapped fields<\/li>\n
                                                                                                                  • Discrete fields for prescribed conditions, orientations, offset, and shell thicknesses\n
                                                                                                                      \n
                                                                                                                    • Volume fraction discrete field<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n

                                                                                                                      [\/et_pb_accordion_item][et_pb_accordion_item title=”Amplitude Curves” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                                                                        \n
                                                                                                                      • Tabular<\/li>\n
                                                                                                                      • Equally-spaced<\/li>\n
                                                                                                                      • Periodic<\/li>\n
                                                                                                                      • Modulated<\/li>\n
                                                                                                                      • Decay<\/li>\n
                                                                                                                      • Solution-dependent<\/li>\n
                                                                                                                      • Smooth-step<\/li>\n
                                                                                                                      • Actuator<\/li>\n
                                                                                                                      • User<\/li>\n<\/ul>\n

                                                                                                                        [\/et_pb_accordion_item][et_pb_accordion_item title=”Fracture Mechanics” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                                                                          \n
                                                                                                                        • Contour integral<\/li>\n
                                                                                                                        • Extended finite element method (xFEM)<\/li>\n
                                                                                                                        • Seams and cracks<\/li>\n<\/ul>\n

                                                                                                                          [\/et_pb_accordion_item][\/et_pb_accordion][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section fb_built=”1″ admin_label=”Meshing” _builder_version=”4.27.0″ _module_preset=”default” background_color=”RGBA(255,255,255,0)” global_colors_info=”{}”][et_pb_row _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

                                                                                                                          <\/span>Meshing<\/span><\/h2>\n

                                                                                                                          [\/et_pb_text][et_pb_accordion _builder_version=”4.27.0″ _module_preset=”default” background_enable_color=”off” global_colors_info=”{}”][et_pb_accordion_item title=”Mesh Seeding” open=”on” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

                                                                                                                            \n
                                                                                                                          • Global seed size\n
                                                                                                                              \n
                                                                                                                            • Curvature-based refinement<\/li>\n
                                                                                                                            • Minimum element size<\/li>\n<\/ul>\n<\/li>\n
                                                                                                                            • Edge seed\n
                                                                                                                                \n
                                                                                                                              • Uniform<\/li>\n
                                                                                                                              • Biased<\/li>\n
                                                                                                                              • By size<\/li>\n
                                                                                                                              • By number<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n

                                                                                                                                [\/et_pb_accordion_item][et_pb_accordion_item title=”Structured Meshing” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                                                                                  \n
                                                                                                                                • 1D<\/li>\n
                                                                                                                                • 2D regions<\/li>\n
                                                                                                                                • 3D solid regions<\/li>\n<\/ul>\n

                                                                                                                                  [\/et_pb_accordion_item][et_pb_accordion_item title=”Surface Meshing” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                                                                                    \n
                                                                                                                                  • Automatic quadrilateral meshing\n
                                                                                                                                      \n
                                                                                                                                    • Medial axis<\/li>\n
                                                                                                                                    • Advancing front<\/li>\n<\/ul>\n<\/li>\n
                                                                                                                                    • Automatic triangular meshing<\/li>\n
                                                                                                                                    • Mapped meshing<\/li>\n<\/ul>\n

                                                                                                                                      [\/et_pb_accordion_item][et_pb_accordion_item title=”Solid Meshing” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                                                                                        \n
                                                                                                                                      • Fully automatic tetrahedral meshing<\/li>\n
                                                                                                                                      • Fully automatic swept meshing\n
                                                                                                                                          \n
                                                                                                                                        • Medial axis<\/li>\n<\/ul>\n<\/li>\n
                                                                                                                                        • Bottom-up hexahedral meshing<\/li>\n
                                                                                                                                        • Boundary layer meshing<\/li>\n<\/ul>\n

                                                                                                                                          [\/et_pb_accordion_item][et_pb_accordion_item title=”Virtual Topology” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                                                                                            \n
                                                                                                                                          • Combine faces\/edges<\/li>\n
                                                                                                                                          • Automatic creation\/restore tools<\/li>\n<\/ul>\n

                                                                                                                                            [\/et_pb_accordion_item][et_pb_accordion_item title=”Element Quality” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                                                                                              \n
                                                                                                                                            • Statistical and analysis checks<\/li>\n
                                                                                                                                            • Stable time increment<\/li>\n
                                                                                                                                            • Maximum allowable frequency<\/li>\n
                                                                                                                                            • Mesh deviation computation<\/li>\n<\/ul>\n

                                                                                                                                              [\/et_pb_accordion_item][et_pb_accordion_item title=”Queries” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                                                                                                \n
                                                                                                                                              • Mass and mesh<\/li>\n
                                                                                                                                              • Stable time increment<\/li>\n
                                                                                                                                              • Maximum allowable frequency<\/li>\n
                                                                                                                                              • Mesh stack orientation<\/li>\n
                                                                                                                                              • Mesh gap\/intersections<\/li>\n
                                                                                                                                              • Free\/non-manifold edges<\/li>\n
                                                                                                                                              • Unmeshed regions<\/li>\n<\/ul>\n

                                                                                                                                                [\/et_pb_accordion_item][et_pb_accordion_item title=”Mesh Edit” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                                                                                                  \n
                                                                                                                                                • Node\n
                                                                                                                                                    \n
                                                                                                                                                  • Create<\/li>\n
                                                                                                                                                  • Edit<\/li>\n
                                                                                                                                                  • Drag<\/li>\n
                                                                                                                                                  • Delete<\/li>\n
                                                                                                                                                  • Merge<\/li>\n
                                                                                                                                                  • Adjust midside<\/li>\n
                                                                                                                                                  • Project<\/li>\n
                                                                                                                                                  • Renumber<\/li>\n<\/ul>\n<\/li>\n
                                                                                                                                                  • Element\n
                                                                                                                                                      \n
                                                                                                                                                    • Create<\/li>\n
                                                                                                                                                    • Delete<\/li>\n
                                                                                                                                                    • Flip surface normal<\/li>\n
                                                                                                                                                    • Orient the stack direction<\/li>\n
                                                                                                                                                    • Collapse\/split edge<\/li>\n
                                                                                                                                                    • Swap diagonal<\/li>\n
                                                                                                                                                    • Split\/combine elements<\/li>\n
                                                                                                                                                    • Renumber<\/li>\n
                                                                                                                                                    • Merge\/subdivide layers<\/li>\n<\/ul>\n<\/li>\n
                                                                                                                                                    • Offset (create shell\/solid layers)<\/li>\n
                                                                                                                                                    • Automatic collapse of silver edges<\/li>\n
                                                                                                                                                    • Convert triangular elements to tetrahedral elements<\/li>\n
                                                                                                                                                    • Refine 2-D planar meshes<\/li>\n<\/ul>\n

                                                                                                                                                      [\/et_pb_accordion_item][et_pb_accordion_item title=”Adaptive Remeshing” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                                                                                                        \n
                                                                                                                                                      • Automatic and manual<\/li>\n<\/ul>\n

                                                                                                                                                        [\/et_pb_accordion_item][et_pb_accordion_item title=”Element Library” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”off”]<\/p>\n

                                                                                                                                                          \n
                                                                                                                                                        • Beam<\/li>\n
                                                                                                                                                        • Truss<\/li>\n
                                                                                                                                                        • Connector<\/li>\n
                                                                                                                                                        • Shell<\/li>\n
                                                                                                                                                        • Membrane<\/li>\n
                                                                                                                                                        • Cohesive<\/li>\n
                                                                                                                                                        • Continuum shell<\/li>\n
                                                                                                                                                        • Continuum<\/li>\n
                                                                                                                                                        • Elbow<\/li>\n
                                                                                                                                                        • Gasket<\/li>\n
                                                                                                                                                        • Pipe<\/li>\n
                                                                                                                                                        • Eulerian<\/li>\n
                                                                                                                                                        • Cylindrical<\/li>\n
                                                                                                                                                        • Fluid<\/li>\n
                                                                                                                                                        • Electromagnetic<\/li>\n<\/ul>\n

                                                                                                                                                          [\/et_pb_accordion_item][\/et_pb_accordion][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section fb_built=”1″ admin_label=”Job Management” _builder_version=”4.27.0″ _module_preset=”default” background_color=”#f7f7f7″ global_colors_info=”{}”][et_pb_row _builder_version=”4.27.0″ _module_preset=”default” background_color=”RGBA(255,255,255,0)” custom_margin=”0px||0px||false|false” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_accordion _builder_version=”4.27.0″ _module_preset=”default” background_enable_color=”off” global_colors_info=”{}”][et_pb_accordion_item title=”Job Management” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”on”]<\/p>\n

                                                                                                                                                            \n
                                                                                                                                                          • Submission<\/li>\n
                                                                                                                                                          • Parallel computing options<\/li>\n
                                                                                                                                                          • Restart<\/li>\n
                                                                                                                                                          • Monitor and view job files<\/li>\n
                                                                                                                                                          • Co-execution\n
                                                                                                                                                              \n
                                                                                                                                                            • Abaqus\/Standard to Abaqus\/Explicit<\/li>\n
                                                                                                                                                            • Abaqus\/CFD to Abaqus\/Standard or Abaqus\/Explicit<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n

                                                                                                                                                              [\/et_pb_accordion_item][\/et_pb_accordion][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section fb_built=”1″ admin_label=”Visualization of Model
                                                                                                                                                              \nand Output Data” _builder_version=”4.27.0″ _module_preset=”default” background_color=”RGBA(255,255,255,0)” global_colors_info=”{}”][et_pb_row _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_accordion _builder_version=”4.27.0″ _module_preset=”default” background_enable_color=”off” global_colors_info=”{}”][et_pb_accordion_item title=”Visualization of Model and Output Data” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”on”]<\/p>\n

                                                                                                                                                                \n
                                                                                                                                                              • Model plotting<\/li>\n
                                                                                                                                                              • Model and results data<\/li>\n
                                                                                                                                                              • Deformed, contour, vector\/tensor, path, extreme value, ply-stack, through thickness, tick mark, overlay, material orientation, and X-Y plots<\/li>\n
                                                                                                                                                              • Loads display<\/li>\n
                                                                                                                                                              • View manipulation, linked viewports, view center setting, and camera options<\/li>\n
                                                                                                                                                              • Multiple viewports and view synchronization<\/li>\n
                                                                                                                                                              • Automatic color coding<\/li>\n
                                                                                                                                                              • View cuts\n
                                                                                                                                                                  \n
                                                                                                                                                                • Planar\/cylindrical\/spherical<\/li>\n
                                                                                                                                                                • Isosurface<\/li>\n
                                                                                                                                                                • Resultant force\/moment output<\/li>\n
                                                                                                                                                                • Multiple cuts<\/li>\n
                                                                                                                                                                • Free bodies at all view cuts<\/li>\n<\/ul>\n<\/li>\n
                                                                                                                                                                • Beam profile and shell thickness display<\/li>\n
                                                                                                                                                                • Results display on beam sections<\/li>\n
                                                                                                                                                                • Free-body cuts<\/li>\n
                                                                                                                                                                • Nodal force plot, history plot, and multiple free-body display<\/li>\n
                                                                                                                                                                • Animations\n
                                                                                                                                                                    \n
                                                                                                                                                                  • Movie import\/export and overlay<\/li>\n<\/ul>\n<\/li>\n
                                                                                                                                                                  • Mirroring and patterning of symmetric models<\/li>\n
                                                                                                                                                                  • Failed element removal<\/li>\n
                                                                                                                                                                  • Stress linearization<\/li>\n
                                                                                                                                                                  • Streamlines<\/li>\n
                                                                                                                                                                  • X-Y data operators and data filtering<\/li>\n
                                                                                                                                                                  • Tabular data reports<\/li>\n
                                                                                                                                                                  • Probe\/query tools and annotations<\/li>\n
                                                                                                                                                                  • Network connection to remote output databases<\/li>\n
                                                                                                                                                                  • Diagnostics and constraints visualization<\/li>\n
                                                                                                                                                                  • Automatic report generation<\/li>\n<\/ul>\n

                                                                                                                                                                    [\/et_pb_accordion_item][\/et_pb_accordion][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section fb_built=”1″ admin_label=”Process Automation” _builder_version=”4.27.0″ _module_preset=”default” background_color=”#f7f7f7″ global_colors_info=”{}”][et_pb_row _builder_version=”4.27.0″ _module_preset=”default” background_color=”RGBA(255,255,255,0)” custom_margin=”0px||0px||false|false” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_accordion _builder_version=”4.27.0″ _module_preset=”default” background_enable_color=”off” global_colors_info=”{}”][et_pb_accordion_item title=”Process Automation” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}” open=”on”]<\/p>\n

                                                                                                                                                                      \n
                                                                                                                                                                    • Python scripting<\/li>\n
                                                                                                                                                                    • GUI toolkit<\/li>\n
                                                                                                                                                                    • Macro manager<\/li>\n
                                                                                                                                                                    • Plug-ins architecture<\/li>\n
                                                                                                                                                                    • Python Development Environment (PDE)<\/li>\n<\/ul>\n

                                                                                                                                                                      [\/et_pb_accordion_item][\/et_pb_accordion][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section fb_built=”1″ admin_label=”Plug-ins” _builder_version=”4.27.0″ _module_preset=”default” background_color=”RGBA(255,255,255,0)” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][et_pb_row _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_accordion _builder_version=”4.27.0″ _module_preset=”default” background_enable_color=”off” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][et_pb_accordion_item _builder_version=”4.27.0″ _module_preset=”default” title=”Plug-ins” hover_enabled=”0″ sticky_enabled=”0″]<\/p>\n

                                                                                                                                                                        \n
                                                                                                                                                                      • Examples<\/li>\n
                                                                                                                                                                      • Interactive plug-in GUI builder (RSG)<\/li>\n
                                                                                                                                                                      • Script upgrade<\/li>\n
                                                                                                                                                                      • Excel utilities<\/li>\n
                                                                                                                                                                      • NVH postprocessing<\/li>\n
                                                                                                                                                                      • Adaptivity plotter<\/li>\n
                                                                                                                                                                      • ODB combine tool<\/li>\n
                                                                                                                                                                      • STL import\/export<\/li>\n<\/ul>\n

                                                                                                                                                                        [\/et_pb_accordion_item][\/et_pb_accordion][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section fb_built=”1″ admin_label=”Printing and Output” _builder_version=”4.27.0″ _module_preset=”default” background_color=”#f7f7f7″ global_colors_info=”{}”][et_pb_row _builder_version=”4.27.0″ _module_preset=”default” background_color=”RGBA(255,255,255,0)” custom_margin=”0px||0px||false|false” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_accordion _builder_version=”4.27.0″ _module_preset=”default” background_enable_color=”off” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][et_pb_accordion_item _builder_version=”4.27.0″ _module_preset=”default” title=”Printing and Output” hover_enabled=”0″ sticky_enabled=”0″]<\/p>\n

                                                                                                                                                                          \n
                                                                                                                                                                        • PS\/EPS\/PNG\/TIFF\/SVG<\/li>\n
                                                                                                                                                                        • 3D XML\/VRML<\/li>\n
                                                                                                                                                                        • Hardcopy<\/li>\n<\/ul>\n

                                                                                                                                                                          [\/et_pb_accordion_item][\/et_pb_accordion][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section fb_built=”1″ _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_row column_structure=”1_5,1_5,1_5,1_5,1_5″ _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”1_5″ _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_button button_url=”https:\/\/3ds.com” button_text=”Dassault Syst\u00e9mes” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_button][\/et_pb_column][et_pb_column type=”1_5″ _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_button button_url=”https:\/\/kimeca.com.mx\/index.php\/products\/dassault-systemes\/simulia\/” button_text=”SIMULIA” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_button][\/et_pb_column][et_pb_column type=”1_5″ _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_button button_url=”https:\/\/kimeca.com.mx\/index.php\/products\/dassault-systemes\/catia\/” button_text=”CATIA” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_button][\/et_pb_column][et_pb_column type=”1_5″ _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_button button_url=”https:\/\/kimeca.com.mx\/index.php\/products\/dassault-systemes\/3dexperience\/” button_text=”3DEXPERIENCE” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_button][\/et_pb_column][et_pb_column type=”1_5″ _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_button button_url=”https:\/\/kimeca.com.mx\/index.php\/products\/dante-heat-treatment-software\/” button_text=”DANTE” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_button][\/et_pb_column][\/et_pb_row][et_pb_row column_structure=”1_5,1_5,1_5,1_5,1_5″ _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”1_5″ _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_column][et_pb_column type=”1_5″ _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_column][et_pb_column type=”1_5″ _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_image _builder_version=”4.27.0″ _module_preset=”default” alt=”Abaqus\/CAE” title_text=”abq-cae” src=”https:\/\/kimeca.com.mx\/wp-content\/uploads\/2025\/12\/abq-cae.png” hover_enabled=”0″ sticky_enabled=”0″][\/et_pb_image][\/et_pb_column][et_pb_column type=”1_5″ _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_column][et_pb_column type=”1_5″ _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_column][\/et_pb_row][\/et_pb_section]<\/p>\n","protected":false},"excerpt":{"rendered":"

                                                                                                                                                                          (Complete Abaqus Environment) is an integrated software platform for Finite Element Analysis (FEA), providing a single, user-friendly interface for model creation, analysis setup, job management, and results visualization (pre-processing and post-processing) for Abaqus simulationsGeometry Solid features Extrude Loft Revolve Sweep Draft, twist, and pitch Fillet\/chamfer Cut features Extrude Loft Revolve Sweep Circular hole Shell features […]<\/p>\n","protected":false},"author":4,"featured_media":0,"parent":491,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"on","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"class_list":["post-4567","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/kimeca.com.mx\/index.php\/wp-json\/wp\/v2\/pages\/4567","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/kimeca.com.mx\/index.php\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/kimeca.com.mx\/index.php\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/kimeca.com.mx\/index.php\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/kimeca.com.mx\/index.php\/wp-json\/wp\/v2\/comments?post=4567"}],"version-history":[{"count":0,"href":"https:\/\/kimeca.com.mx\/index.php\/wp-json\/wp\/v2\/pages\/4567\/revisions"}],"up":[{"embeddable":true,"href":"https:\/\/kimeca.com.mx\/index.php\/wp-json\/wp\/v2\/pages\/491"}],"wp:attachment":[{"href":"https:\/\/kimeca.com.mx\/index.php\/wp-json\/wp\/v2\/media?parent=4567"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}